OpenRail Overhead Line Designer Help

Cross Span

Tool	Description
Multitrack Cross Arm	Deletes an existing cantilever.
Portal Structure	Assigns a support point to a portal structure.
Multitrack Cross Arm 2	Creates a multi track cross arm 2.
Pull Off	Creates a Pull Off.
Rail Ridge
Head Span	Creates a head span.
Cross Span Wire	Creates a cross span wire.
Drop Tube	Creates a head span drop tube.
Structure Fixing	Creates a new fixing at structure.
Create Elastic Support
Support Point	Add to Multitrack Cross Arm 2 - Adds a support point to the multitrack arm 2. Add to Pull Off - Adds a support point to a pull off. The position of the pull is adjusted so that the support point is arranged at the axis of the pull off. Add to Rail Ridge - Add to Head Span Support - Associates support points to a head span. Remove from Multitrack Cross Arm 2 - Separates a support point from the multitrack arm 2. If there are no remaining support points, it is automatically deleted. Otherwise, it remains in the same position. Remove from Pull Off - Separates a support point from the pull off. If there are no remaining support points, it is automatically deleted. Otherwise, it remains in the same position. Remove from Rail Ridge -

Create Multi Track Cross Arm

Create Multi Track Cross Arm 2

Pull Off

Head Span

Cross Span Wire

Drop Tube

Structure Fixing

Add to Head Span Support

Parent topic: Catenary Design